PDS3_DATA_SET_ID = VG1-J-MAG-4-SUMM-S3COORDS-9.60SEC-V1.1 DATA_SET_NAME = VG1 JUP MAG RESAMPLED SYSTEM III (1965) COORDS 9.60SEC V1.1 START_TIME = 1979-03-03T00:00:35.978 STOP_TIME = 1979-03-17T00:00:34.585 ORIGINAL_DATA_SET_RELEASE_DATE = 1998-05-01 PRODUCER_FULL_NAME = NESS, N. F. DATA_SET_SOURCE = NATIONAL SPACE SCIENCE DATA CENTER REFERENCES: Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic Field Experiment for Voyagers 1 and 2, Space Sci. Rev., Vol. 21, p. 235, 1977. Behannon, K.W., L.F. Burlaga, and N.F. Ness, The Jovian Magnetotail and Its Current Sheet, J. Geophys. Res., Vol. 86, p. 8385, 1981. Connerney, J.E.P., M.H. Acuna, and N.F. Ness, Modeling the Jovian Current Sheet and Inner Magnetosphere, J. Geophys. Res., Vol. 86, p. 8370, 1981. Dessler, A.J., Physics of Jovian Magnetosphere Coordinate Systems, Physics of the Jovian Magnetosphere, 1983. Lepping, R.P., L.F. Burlaga, L.W. Klein, J. Jessen, and C.C. Goodrich, Observations of the Magnetic Field and Plasma Flow in Jupiter's Magnetosheath, J. Geophys. Res., Vol. 86, p. 8141, 1981. Ness, N.F., M.H. Acuna, R.P. Lepping, L.F. Burlaga, K.W. Behannon, and F.M. Neubauer, Magnetic Field Studies at Jupiter by Voyager 1: Preliminary Results, Science, Vol. 204, p. 982, 1979. DATA_SET_DESCRIPTION Version 1.1 ----------- This version 1.1 data set replaces the version 1.0 data set (DATA_SET_ID = VG1-J-MAG-4-9.60SEC) previously archived with PDS. Changes to this version include the addition of data columns not included in version 1.0, the modification of time format and flag values, and upgrade of associated labels and catalog templates to PDS version 3.2. Data Set Overview ================= This data set includes calibrated magnetic field data acquired by the Voyager 1 Low Field Magnetometer (LFM) during the Jupiter encounter. Coverage begins in the solar wind inbound to Jupiter and continues past the last outbound bowshock crossing. The data are in System III (1965) (SYS3) coordinates and have been averaged from the 1.92 second summary data to a 9.6 second sample rate. All magnetic field measurements are given in nanoTesla (nT). The magnetic field data are calibrated (see the calibration description included in the Voyager 1 Magnetometer instrument catalog file for details). Parameters ========== The full LFM instrument sample rate is 1 sample per 0.06 seconds. Full telemetry resolution 'detail' data must be obtained from the instrument team. For this data set, the data have been resampled to 9.6 seconds from 1.92 second summary data. The 1.92 second data were in turn resampled from the detail data. The LFM has eight dynamic ranges. The instrument is designed switch between dynamic ranges automatically depending upon the observed magnetic field magnitude and fluctuations. Instrument digitization uncertainty depends upon dynamic range as indicated in the following table (from [BEHANNONETAL1977]). ----------------------------------------------- LFM Dynamic ranges and quantization uncertainty ----------------------------------------------- Range (nT) Quantization (nT) ----------------------------------------------- 1. +/- 8.8 +/- .0022 2. +/- 26 +/- .0063 3. +/- 79 +/- .019 4. +/- 240 +/- .059 5. +/- 710 +/- .173 6. +/- 2100 +/- .513 7. +/- 6400 +/- 1.56 8. +/- 50,000 +/- 12.2 Processing ========== Voyager EDR's undergo the following processing in order to produce these 9.6 second averaged summary data: * Read EDR * Unpack header block (rec. id, s/c id, tel. mode, FDS counts, data flags) * Convert selected time tags to integer time (yy/ddd/hh:mm:ss.fff) * Unpack sub-header block (MAG status words, plasma data) * Unpack science block (MAG counts) * Convert counts to gammas * Apply sensor and boom alignment matrices * Rotate (optional) 1.92 second averages while averaging detail gammas to create 1.92 second averages * Average 1.92 second data to 9.6 seconds * Write Summary record Counts are measured onboard using 12 bit words that may represent values ranging from 0-4096. Integer counts are converted to magnetic field units (gammas) by subtracting a zero offset, from the measured MAG value and multiplying this difference by the sensitivity of the instrument. Data ==== The data files are given in ASCII, fixed field width, comma delimited tables. The record structure is described in the following table: -------------------------------------------------------------------- 9.6 Second System III (1965) Coordinates -------------------------------------------------------------------- Column Type Description -------------------------------------------------------------------- time a23 spacecraft event time (UT) of the sample in the format: yyyy-mm-ddThh:mm:ss.sss sclk a12 spacecraft clock in the format: MOD65536:MOD60:FDS-LINE mag_id i1 magnetometer ID (1 = LFM, 2 = HFM) Br f9.3 average of detail magnetic field R component in nT Btheta f9.3 average of detail magnetic field Theta component in nT Bphi f9.3 average of detail magnetic field Phi component in nT Bmag f9.3 magnitude of the averaged magnetic field components in nT avg_Bmag f9.3 average of the magnetic field magnitude over the averaging interval in nT Delta f7.3 spacecraft centered heliographic magnetic field latitude in degrees: Delta = asin(Bz/Bmag)* Lambda f7.3 spacecraft centered heliographic magnetic field longitude in degrees: Lambda = atan(By/Bx)* rms_Br f8.3 root-mean-square deviation of Br over the averaging interval in nT rms_Bt f8.3 root-mean-square deviation of Btheta over the averaging interval in nT rms_Bp f8.3 root-mean-square deviation of Bphi over the averaging interval in nT npts i2 number of detail points in the average * while Br, Btheta, and Bphi are spherical coordinates, the angles Delta and Lambda are derived from Cartesian coordinates Coordinate Systems ================== These data are provided in a conventional, right handed, spherical coordinate system with vectors R, Theta, and Phi. This system is sometimes referred to as System III (1965) right handed coordinates. The magnetic field vectors are: Br - radial B-field component (along the Jupiter to spacecraft line) positive away from Jupiter Btheta - North/South (SYS3) B-field component, positive southward Bphi - azimuthal (SYS3) B-field component, positive eastward The Jupiter System III coordinate system is described in Appendix B (p. 498) of [DESSLER1983]. CONFIDENCE_LEVEL_NOTE Review ====== These data have been reviewed by the instrument team and are of the highest quality that can be generated at this time. Science results based on these data have been published in several journals (Science, Nature, JGR, etc.). After submission to the PDS, these data successfully completed the peer review process. Data Coverage and Quality ========================= These data originally included an 8-byte flag indicating software or spacecraft hardware intervention which reduced confidence in the data. However, these flags were provided only at a 48 second rate and are not included in this data set. To identify data confidence concerns in this data set please refer to the data flag provided in the 48 second data set. Data confidence conditions apply beginning at the record matching the time tag of the 48 second data and persist for 48 seconds (or 5 records in the 9.6 second data).