Cassini MIMI LEMMS Raw Data Description                                     
MIMI - Magnetospheric Imaging Instrument                                    
LEMMS - Low Energy Magnetospheric Measurement System                        
                                                                            
                                                                            
This document describes known errors or deficiencies in the Cassini MIMI    
LEMMS Raw Data Collection.                                                  
                                                                            
This bundle was produced for the Planetary Data System (PDS) at the         
Planetary Plasma Interactions (PPI) node.                                   
                                                                            
For questions or problems regarding this bundle, please contact the PDS/PPI 
operator:                                                                   
                                                                            
    Email               pds_operator@igpp.ucla.edu                          
                                                                            
These data were originally archived in the following PDS3 data sets:        
CO-E/J/S/SW-MIMI-2-LEMMS-UNCALIB-V1.1 (https://doi.org/10.17189/1519598).   
                                                                            
These data were originally archived under PDS3 in the following volumes:    
COMIMI_0000 and COMIMI_9003.                                                
                                                                            
There were no known deficiencies or errors reported in the errata.txt files 
under PDS3.                                                                 
                                                                            
============================================================================
General Comments                                                            
                                                                            
At the time of migration, not all browse plots were generated for the raw   
data products. Please note there is not a browse plot for each data product.
Refer to the internal references for the matching browse and data products. 
                                                                            
Found in LFRT0_2001173_0000.CSV, record 56493 field 9:                      
The original data value of: "2759.)83" has been changed to "2759.983".      
                                                                            
The formatting was modified in the LEMMS_GEOMETRY.CSV file to correctly     
fit in a CSV file. The data values themselves remain unchanged.             
                                                                            
LACC1_ALGO_0000.TXT and LFRT1_ALGO_0000.TXT were not included in the        
migration. The calibration algorithms do not change with between the data   
format versions. Refer to format version zero for the higher versioned data.