Cassini MIMI LEMMS Calibrated Bundle                                          
Cassini MIMI LEMMS Calibrated Data Description                                
MIMI - Magnetospheric Imaging Instrument                                      
LEMMS - Low Energy Magnetospheric Measurement System                          
                                                                              
                                                                              
This document describes known errors or deficiencies in the Cassini MIMI      
CHEMS Calibrated Data Bundle.                                                 
                                                                              
This bundle was produced for the Planetary Data System (PDS) at the           
Planetary Plasma Interactions (PPI) node.                                     
                                                                              
For questions or problems regarding this bundle, please contact the PDS/PPI   
operator:                                                                     
                                                                              
    Email               pds_operator@igpp.ucla.edu                            
                                                                              
These data were originally archived in the following PDS3 data sets:          
CO-S-MIMI-4-LEMMS-CALIB-V1.1 (https://doi.org/10.17189/1519608).              
                                                                              
These data were originally archived under PDS3 in the following volume:       
COMIMI_L001.                                                                  
                                                                              
==============================================================================
General Comments                                                              
                                                                              
NOTE: On May 28, 2015 it was discovered that the pointer to the data files    
used incorrect units for the offsets for the start of objects.  Prior to      
that date pointers used offsets in rows, which is not allowed for spreadsheet 
objects.  Spreadsheet objects require pointer offsets to be given in bytes    
since the record length is variable.  This issue was corrected for all files  
on the date listed above and the data provider was notified so that future    
deliveries would be correct.  This problem in no way impacts the contents     
of the data files themselves.                                                 
                                                                              
During the migration from PDS3 to PDS4 the above mentioned issues have been   
resolved in the migrated labels. Also discovered was a discrepancy between    
the PDS3 label data headings and CSV data headings. Please refer to the       
migrated PDS4 xml label files for the appropriately matching headings to      
data.                                                                         
                                                                              
Some data products found in the PHA data collections contained "NaN" and      
"Infinity" data values. These data have been replaced with the specified      
numeric fill in the respective PHA collections: "-1.0E38".