("27JRJUPOCC01 " OAPEL "RADSCI" (Time SCE "2000-051/17:49:00.000" "2000-051/23:09:00.000" (Duration "0/05:20:00.000")) (ID "27JRJUPOCC01 ") (REQUESTOR "RST-AWG/AANABTAWI 3-1073") (TEAM "RS") (INSTRUMENT "RS") (LOAD "I27A") (WORKGROUP "AWG") (PLOTKEY "") (RIDING "") (TITLE "Earth Near-Occultation By Jupiter") (OBJECTIVE "The primary objective is to observe the atmosphere of Jupiter and expect to yield electron density profiles of the Jovian atmosphere.") (DESIGN "For this observation, the telemetry must be turned OFF (carrier only). TWNC must be ON, and an uplink is not necessary. The observation begins at 25,000 km above Jupiter (at 1 bar) and continues until 25,000 km above Jupiter (at 1 bar).") (CDSCOST 200) (TOPLABEL "27JRJUPOCC01") (BOTLABEL "") (PS "") (TYPE SCI) (RPT BOTH) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27LOADA 01 " OAPEL "LDBDY" (Time SCE "2000-052/04:00:00.000" "2000-052/04:01:00.000" (Duration "0/00:01:00.000")) (ID "27LOADA 01 ") (REQUESTOR "J.GROSS") (TEAM "SSO") (INSTRUMENT "") (LOAD "") (WORKGROUP "SSO") (PLOTKEY "") (RIDING "") (TITLE "Load A Boundary ") (OBJECTIVE "") (DESIGN "") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT BOTH) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE ) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MBSURVEY01-" OAPEL "MWG" (Time "LDA+CDS 0:00:0" "LDA+CDS 3323:06:0" (Duration "3323:06:0")) (ID "27MBSURVEY01-") (REQUESTOR "MWG-MWG D. BINDSCHADLER X31139") (TEAM "MWG") (INSTRUMENT "MWG") (LOAD "I27A") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "R/T Magnetospheric Survey: I27 Encounter") (OBJECTIVE "BTG=0.0 Lowrate, realtime data, collected during the portion of I27 near Io, Jupiter, and along the dusk side, is obtained in this GEM orbit to provide for a number of MWG objectives. Data through the torus and near Io provides background and contextual data for the recorded, high rate measurements of the Io interaction region. If BTG are available for it, outbound RTS will sampe the dusk side of the magnetosphere. Nominal plan is for RTS only from the beginning of the load through the time that playback is initiated.") (DESIGN "OPTRTM to select instruments and AACS into RT.") (CDSCOST 57) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MDRTDUST01-" OAPEL "DDS" (Time SCE "2000-052/04:00:00.000" "2000-052/04:01:00.666" (Duration "0/00:01:00.666")) (ID "27MDRTDUST01-") (REQUESTOR "DDS-MWG D. BINDSCHADLER X31139") (TEAM "DDS") (INSTRUMENT "DDS") (LOAD "I27A") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "DDS Start RTS for I27 Sequence") (OBJECTIVE "BTG=0.0 MBITS A major objective of the dust detector will be collecting real time science (RTS) data using a strategy that is based on analysis of data from Prime Mission and GEM. The dust detector observation timing is designed to return data during periods of maximum impact rates. These periods are expected to shift strongly toward the outbound leg of the GMM orbits as the line of apsides of Galileo's orbit rotates with respect to Earth. There are several science objectives encompassed by this dataset. The most important is to monitor the newly discovered small magnetospheric dust particles and the dust-magnetosphere interactions. A related objective is to find new effects of the relation between dust sources (Io, Europa, etc.) and the magnetospheric conditions (e.g. long term variations) in order to develop and test models that predict dust-magnetosphere interactions. The real time data will also permit the study of large dust particles which are concentrated in the inner jovian system (inside about 20 Rj).") (DESIGN "The first part of desired DDS RTS falls entirely within the time periods that MWG RTS is expected in I27 (see I27MBSURVEY01), so there are no BTG costs to DDS in this OAPEL.") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MMOPAVOF01+" OAPEL "MAG" (Time "LDA+CDS 1:30:0" "LDA+CDS 2:30:0" (Duration "1:00:0")) (ID "27MMOPAVOF01+") (REQUESTOR "MAG-MWG D. BINDSCHADLER X31139") (TEAM "MAG") (INSTRUMENT "MAG") (LOAD "I27A") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "MAG Optimal Averager OFF Before Encounter RTS") (OBJECTIVE "This activity places the magnetometer in a mode appropriate for the resumption of real time science (RTS) data collection. The optimal averager must be turned off before the data can be written to the appropriate place in MAG memory for RTS data collection to occur.") (DESIGN "") (CDSCOST 30) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS CDS) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MWSURVEY01+" OAPEL "PWS" (Time "LDA+CDS 2:00:0" "LDA+CDS 1982:09:0" (Duration "1980:09:0")) (ID "27MWSURVEY01+") (REQUESTOR "PWS-MWG CALEXAND 37773") (TEAM "PWS") (INSTRUMENT "PWS") (LOAD "A") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "PWS encounter survey") (OBJECTIVE "") (DESIGN "") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS CDS) (SPINSTAT ) (SPINUSE No) (SCANPLAT ) (DMS ) (CDS_SOURCE ) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MLSURVEY01+" OAPEL "PLS" (Time "LDA+CDS 2:00:0" "LDA+CDS 1982:09:0" (Duration "1980:09:0")) (ID "27MLSURVEY01+") (REQUESTOR "PLS-MWG CALEXAND 37773") (TEAM "PLS") (INSTRUMENT "PLS") (LOAD "A") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "PLS encounter survey") (OBJECTIVE "") (DESIGN "") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS CDS) (SPINSTAT ) (SPINUSE No) (SCANPLAT ) (DMS ) (CDS_SOURCE ) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MEINIRTS01 " OAPEL "EPD" (Time "LDA+CDS 2:00:0" "LDA+CDS 3:00:0" (Duration "1:00:0")) (ID "27MEINIRTS01 ") (REQUESTOR "EPD-MWG K FUJII 3-7914 264-580") (TEAM "EPD") (INSTRUMENT "EPD") (LOAD "I27") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "INITIALIZE EPD FOR RTS") (OBJECTIVE "") (DESIGN "EPDMODE PA (28 BYTES) 25RESC RESUME SCAN 25HREF,06 SET HIGH VOLTAGE TO LEVEL 06") (CDSCOST 28) (TOPLABEL "INITIALIZE EPD FOR RTS") (BOTLABEL "") (PS "") (TYPE SCI) (RPT BOTH) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27MHCNFRTS01 " OAPEL "HIC" (Time "LDA+CDS 2:00:0" "LDA+CDS 7:00:0" (Duration "5:00:0")) (ID "27MHCNFRTS01 ") (REQUESTOR "HIC-MWG K FUJII 3-7914 264-580") (TEAM "HIC") (INSTRUMENT "HIC") (LOAD "I27") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "CONFIGURE HIC FOR RTS") (OBJECTIVE "") (DESIGN "1. UTILITY PA - PRI STRING (30 BYTES ESTIMATED) 6HIC ON ASSIGNS THE GLOBAL CDS VARIABLE 28 TO ENABLE HIC DATA COLLECTION FROM THE SHARED HIC/EUV DATA BUS. 2. HICCMD PA (64 BYTES ESTIMATED) 24R REDUNDANT EUV POWER OFF 28E 0,0,0,0,0,0,0,0 LET E PREAMP POWER ON 28PHA 0,0,0,0,0,0,0,0 PHA (WDSTP,TRPL,DUBL,LETB,WDPEN; ON) 28ANAL 1,0,0,0,0,0,0,0 LB3:OFF; LB2,LE3,LE4,LE1/B2,LE2/B1,LE1/A2:ON 28BP 0,0,0,0,0,0,0,0 LET B PREAMP ON 28MISC 0,0,0,0,0,0,0,0 HV REDUNDANT:ON; CAL DISABLE:ON; LET E AUTO GAIN:ON; LET E GAIN SET:NO") (CDSCOST 94) (TOPLABEL "CONFIGURE HIC FOR RTS") (BOTLABEL "") (PS "") (TYPE SCI) (RPT BOTH) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27TTA 01 " OAPEL "MSNEV1" (Time "IEE-SCE 0/13:56:22.000" "IEE-SCE 0/13:55:21.334" (Duration "0/00:01:00.666")) (ID "27TTA 01 ") (REQUESTOR "J.GROSS") (TEAM "SSO") (INSTRUMENT "") (LOAD "") (WORKGROUP "SSO") (PLOTKEY "") (RIDING "") (TITLE "Track Change 3") (OBJECTIVE "") (DESIGN "") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT BOTH) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS Y) (CDS_SOURCE ) (USESCAN 0) (USEREC 1) (TEMPLATE "")) ("27NPPPRON_01 " OAPEL "PPR" (Time "IEE-CDS 817:00:0" "IEE-CDS 816:00:0" (Duration "1:00:0")) (ID "27NPPPRON_01 ") (REQUESTOR "PPR-SWG LTAMPPARI") (TEAM "PPR") (INSTRUMENT "PPR") (LOAD "27A") (WORKGROUP "SWG") (PLOTKEY "") (RIDING "") (TITLE "PPR Power on") (OBJECTIVE "") (DESIGN "") (CDSCOST 106) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS CDS) (SPINSTAT ) (SPINUSE No) (SCANPLAT ) (DMS ) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27NPRCTCAL01 " OAPEL "PPR" (Time "IEE-CDS 815:00:0" "IEE-CDS 803:00:0" (Duration "12:00:0")) (ID "27NPRCTCAL01 ") (REQUESTOR "PPR-SWG LTAMPPARI") (TEAM "PPR") (INSTRUMENT "PPR") (LOAD "27A") (WORKGROUP "SWG") (PLOTKEY "") (RIDING "") (TITLE "PPR Radiometric calibration 01") (OBJECTIVE "BTG=0.0128 , TICS=4 , FMT=BPT Point the scan platform to Zero degrees cone. 27C: 5,21,8,0,0,0,1,OFF,INH,INH,HIGH,OFF") (DESIGN "") (CDSCOST 104) (TOPLABEL "27NPRCTCAL01") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS CDS) (SPINSTAT DUAL) (SPINUSE DUAL No) (SCANPLAT Y) (DMS Y) (CDS_SOURCE OAP) (USESCAN 1) (USEREC 1) (TEMPLATE "")) ("27JPLIMBRD01 " OAPEL "PPR" (Time "IEE-CDS 711:00:0" "IEE-CDS 624:00:0" (Duration "87:00:0")) (ID "27JPLIMBRD01 ") (REQUESTOR "PPR-AWG LTAMPPARI") (TEAM "PPR") (INSTRUMENT "PPR") (LOAD "27A") (WORKGROUP "AWG") (PLOTKEY "") (RIDING "") (TITLE "Limb longitude at central meridian 01") (OBJECTIVE "BTG=0.6246 , TICS=66, FMT=BPT Cover 5 degrees longitude centered on zero (or where limb02 is centered). Cover from 0-15 degrees north (or further if there is time). 27C: 5,21,8,0,0,0,1,OFF,INH,INH,HIGH,OFF. Targetting was extended to 7 Rims (3 additional) due to slewing time needed from RCTCAL01. 50% overlap in scanning direction 75% overlap scan to scan.") (DESIGN "") (CDSCOST 104) (TOPLABEL "27NPLIMBR01") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS CDS) (SPINSTAT DUAL) (SPINUSE DUAL No) (SCANPLAT Y) (DMS Y) (CDS_SOURCE OAP) (USESCAN 1) (USEREC 1) (TEMPLATE "")) ("27MMCONFIG01-" OAPEL "MAG" (Time SCE "2000-053/02:50:00.000" "2000-053/02:52:00.000" (Duration "0/00:02:00.000")) (ID "27MMCONFIG01-") (REQUESTOR "MAG-MWG D. BINDSCHADLER X31139") (TEAM "MAG") (INSTRUMENT "MAG") (LOAD "I27A") (WORKGROUP "MWG") (PLOTKEY "") (RIDING "") (TITLE "MAG Configuration - ILHR at 9.5 Rj Inbound") (OBJECTIVE "The primary GEM operating configuration for the magnetometer is the ILLR mode: inboard sensor on, flip left, low range (512 nT). Each orbit the magnetometer will be switched to the high range (16,384 nT), ILHR mode, when the external magnetic field magnitude exceeds 400 nT. This change will occur somewhere in the vicinity of 9.5 Rj inbound for each orbit. The magnetometer will be reconfigured to ILLR at about 9.5 Rj outbound when the field magnitude drops below 400 nT. The exact time of the configuration changes will be computed during sequence development.") (DESIGN "") (CDSCOST 84) (TOPLABEL "MAGCNFG") (BOTLABEL "") (PS "") (TYPE SCI) (RPT ) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27IOGRVFLD01 " OAPEL "RADSCI" (Time "ICA-SCE 0/10:00:00.000" "ICA+SCE 0/10:00:00.000" (Duration "0/20:00:00.000")) (ID "27IOGRVFLD01 ") (REQUESTOR "RST-SWG/AANABTAWI 3-1073") (TEAM "RS") (INSTRUMENT "RS") (LOAD "I27A") (WORKGROUP "SWG") (PLOTKEY "") (RIDING "") (TITLE "Io Gravity Field Measurement") (OBJECTIVE "To measure the gravity field of Io (using 2-way Doppler)") (DESIGN "This is a coherent doppler experiment. Doppler data is obtained as part of normal tracking coverage of a pass.") (CDSCOST 50) (TOPLABEL "27IOGRVFLD01") (BOTLABEL "") (PS "") (TYPE SCI) (RPT BOTH) (TIMESYS UTC) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE OAP) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27EGEOM 01 " OAPEL "INFO" (Time "EEE+CDS 0:00:0" "EEE+CDS 0:01:0" (Duration "0:01:0")) (ID "27EGEOM 01 ") (REQUESTOR "J.GROSS") (TEAM "SEQ") (INSTRUMENT "") (LOAD "") (WORKGROUP "SEQ") (PLOTKEY "") (RIDING "") (TITLE "Europa C/A") (OBJECTIVE "") (DESIGN "") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE ENG) (RPT BOTH) (TIMESYS CDS) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE ) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27CGEOM 01 " OAPEL "INFO" (Time "CEE+CDS 0:00:0" "CEE+CDS 0:01:0" (Duration "0:01:0")) (ID "27CGEOM 01 ") (REQUESTOR "J.GROSS") (TEAM "SEQ") (INSTRUMENT "") (LOAD "") (WORKGROUP "SEQ") (PLOTKEY "") (RIDING "") (TITLE "Callisto C/A") (OBJECTIVE "") (DESIGN "") (CDSCOST 0) (TOPLABEL "") (BOTLABEL "") (PS "") (TYPE ENG) (RPT BOTH) (TIMESYS CDS) (SPINSTAT ) (SPINUSE No) (SCANPLAT N) (DMS N) (CDS_SOURCE ) (USESCAN 0) (USEREC 0) (TEMPLATE "")) ("27JPLIMBRD02 " OAPEL "PPR" (Time "IEE-CDS 530:00:0" "IEE-CDS 500:00:0" (Duration "30:00:0")) (ID "27JPLIMBRD02 ") (REQUESTOR "PPR-AWG LTAMPPARI") (TEAM "PPR") (INSTRUMENT "PPR") (LOAD "27A") (WORKGROUP "AWG") (PLOTKEY "") (RIDING "") (TITLE "Jupiter limb observation 02") (OBJECTIVE "BTG=0.1971 , TICS=17 , FMT=BPT Please cover from the equator to 15 degrees north (or more if there is time). Cover 1.5 FOV on limb to 2.5 FOV off limb (like in I24). 27C: 5,21,8,0,0,0,1,OFF