PDS_VERSION_ID = PDS3 DATA_SET_ID = "GO-J-PWS-2-EDR-WAVEFORM-10KHZ-V1.0" RECORD_TYPE = STREAM OBJECT = TEXT PUBLICATION_DATE = 2007-02-28 NOTE = "ERRATA.TXT reflects any known deficiencies with files contained on volume GOPWS_9005." END_OBJECT = TEXT END Non-Standard Practices The PDS standards do not specify where to store the required MD5 checksum file for a volume. We have placed it in the root dircetory of the volume with the file name "CHECKSUMS.TXT". This may be considered invalid by some verifiers. The labels for the browse files associated with the GO-J-PWS-2-EDR-WAVEFORM-1KHZ-V1.0 and GO-J-PWS-2-EDR-WAVEFORM-10KHZ-V1.0 datasets in volumes GOMW_5002, GOMW_5004 and GOMW_5005 incorrectly listed the DATA_SET_ID as GO-J-PWS-2-REDR-RTS-SA-FULL-V1.0. This problem was detected and corrected in June 2012. ERRATA This file contains a list of all deficiencies and irregularities that are known to exist at the time of production of this volume. The files referred to in the ^description pointer in all label files do not exist as named. They exist in the /DOCUMENT directory or one of its subdirectories, most likely /DOCUMENT/PROJECT. These files were listed for their usefulness as documentation. In the /DOCUMENT/PROJECT directory, each sub-directory contains documents in Adobe PDF and ASCII text format. The ASCII text version of these documents are direct conversions of the PDF files. The ASCII versions are present to comply with PDS standards. In some cases these ASCII versions have been hand edited to insure their legibility. In many cases, however, this effort has not been made. It is highly recommended that the PDF versions be used when reading these documents, as ASCII has limitations that may prevent proper representation of the original format of these papers. In cases where the ASCII version must be used, note that many of these files may exceed the 80 column page width. It is advisable, therefore, to print any hardcopy of these documents in landscape mode. All PWS waveform data files contain an attached header that looks like a PDS label but does not conform to current PDS standards. Users should ignore this label and refer to the detached PDS labels that are provided. 1) New Static Standard Values PRODUCT_TYPE {DATA, GEOMETRY, CALIBRATION, DOCUMENT, CATALOG, SOFTWARE ANCILLARY, QLOOK_PLOT} HEADER object with HEADER_TYPE = TEXT. 2) Other non-standard practices OBSERVATION_ID Formation does not comply with the formation rule specified in the PDSDD for Galileo data sets. The PDSDD definition is imaging specific. ^DESCRIPTION in PDS minimum labels points to the PDS label of the controling document(s) rather than the ascii version in the document directory as required by the standards. DOCUMENT/*.TXT files might be described as ASCII text documents which would normally have a .ASC extension. In order to be more easily accessible to users, these files have been renamed with a .TXT extension. DOCUMENT/PROJECT/AR_SEF Uplink products included are stored in the DOCUMENT dir. DOCUMENT/PROJECT/AR_SEF/XXXXX Files have PDS minimum labels that point to SEF_SIS which is located in the DOCUMENT/PROJECT/AR_SEF/ directory rather than in DOCUMENT as required by the standards. DOCUMENT/PROJECT - Many documents have unusable ASCII forms created by PDF->ASCII converters. Doesn't comply with PDS standards.