PDS_VERSION_ID = PDS3 DATA_SET_ID = "GO-J-MAG-2-REDR-RAW-DATA-V1.0" RECORD_TYPE = STREAM OBJECT = TEXT PUBLICATION_DATE = 2012-06-29 NOTE = "ERRATA.TXT reflects any known deficiencies with files contained on this volume." END_OBJECT = TEXT END Users are encouraged to provide comments back to the PPI Node of the PDS if errors or omissions are found either in data or in documentation. Please send comments by e-mail or U.S. mail to the PPI Node PDS Operator: Email pds_operator@igpp.ucla.edu Telephone (310) 206-6073 U.S. Mail PDS Operator c/o Dr. Raymond Walker 3845 Slichter Hall UCLA - IGPP Los Angeles, CA 90095-1567 ERRATA This file contains a list of all deficiencies and irregularities that are known to exist at the time of production of this volume. Non-standard practices The PDS standards do not specify where to store the required MD5 checksum file for a volume. We have placed it in the root dircetory of the volume with the file name "CHECKSUMS.TXT". This may be considered invalid by some verifiers. ***************************************************************************** This dataset was originally part of the GOMAG_5001 volume set. The following is the original errata for that volume set: ERRATA This file contains a list of all deficiencies and irregularities that are known to exist at the time of production of the GOMAG_5001 volume. Any errors detected with this DVD will be published on subsequent volumes in this volume set. An online version of errors is also maintained at the PPI Node of the PDS. Any changes or errors that are found on this volume can be found on the PDS/PPI website (http://www.igpp.ucla.edu/cgi-bin/ditdos?errata=GOMAG_5001). The files referred to in the ^description pointer in all label files do not exist as named. They exist in the /DOCUMENT directory or one of its subdirectories, most likely /DOCUMENT/PROJECT. These files were listed for their usefulness as documentation. In the /DOCUMENT/PROJECT directory, each sub-directory contains documents in Adobe PDF and ASCII text format. The ASCII text version of these documents are direct conversions of the PDF files. The ASCII versions are present to comply with PDS standards. In some cases these ASCII versions have been hand edited to insure their legibility. In many cases, however, this effort has not been made. It is highly recommended that the PDF versions be used when reading these documents, as ASCII has limitations that may prevent proper representation of the original format of these papers. In cases where the ASCII version must be used, note that many of these files may exceed the 80 column page width. It is advisable, therefore, to print any hardcopy of these documents in landscape mode. 1) New Static Standard Values PRODUCT_TYPE {DATA, GEOMETRY, CALIBRATION, DOCUMENT, CATALOG, SOFTWARE ANCILLARY, QLOOK_PLOT} HEADER object with HEADER_TYPE = TEXT. 2) Other non-standard practices File names are typically longer than 8.3 OBSERVATION_ID Formation does not comply with the formation rule specified in the PDSDD for Galileo data sets. The PDSDD definition is imaging specific. ^DESCRIPTION in PDS minimum labels points to the PDS label of the controling document(s) rather than the ascii version in the document directory as required by the standards. DOCUMENT/*.TXT files might be described as ASCII text documents which would normally have a .ASC extension. In order to be more easily accessible to users, these files have been renamed with a .TXT extension. DOCUMENT/PROJECT - Many documents have unusable ASCII forms created by PDF->ASCII converters. Doesn't comply with PDS standards.