Trigger 32 Description

Sequence: All
Trigger 32 mode

The instrument is assumed to be operating in trigger 28.

Command Byte Count: 6 Valid Command Count: 90 (Trig 32)

A MEM_TWEAK is included in this trigger to set the WBR/DUST antenna multiplexor to the HF position following WBR or DUST data acquisitions. HRS data rate is limited by availability of CPU cycles to perform data movement operations (i.e. no DMA assist available due to concurrent LFDR activities).

Receiver  Frequency Range       Sensor          Cycle Time     Snapshot Size 
--------  ---------------  ----------------  ----------------  -------------
LFR       1Hz-25Hz         EX,BX               32.000 Seconds          
MFR       25Hz-12KHz       EX,BZ               32.000 Seconds          
HFR       3.6KHz-16MHz     EX,EW                7.375 Seconds          
HFR       3.6KHz-16MHz     EX,EW                7.375 Seconds          
Millisec  8.025MHz         EX                   2.500 Seconds      2048
WFR       50Hz-2.5KHz      EX,EW,BX,BY,BZ      20.000 Seconds      2048
WBR       100Hz-10KHz      EX                   0.125 Seconds      3072
WBR       1KHz-80KHz       HF                   0.125 Seconds      2048


          Correlations Channels    Integ.           Size Frequency     
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz  Start - Stop  
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------  
ABC   2E    y     y       16    n   1000  1              3.6-319KHz       
HF1   2E    n     y        2    n     80  1     30    50 0.325-1.825MHz   
HF2   1E    n     n        1    n     20  1     72   200 1.825-16.225MHz  

Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and 
H2 requires 1.461 sec for a total of 7.146 sec per sweep.  The hfr 
cycle time is 7.375 seconds.