PDS_VERSION_ID = PDS3 RECORD_TYPE = STREAM OBJECT = TEXT PUBLICATION_DATE = 2017-06-27 NOTE = "S98_IEB.TXT describes the set of Instrument Expanded Blocks (IEBs) and individual commands used in the S98 sequence from 2017-02-03 through 2017-04-14, and a short description of each." END_OBJECT = TEXT END S98 RPWS Triggers ----------------- Trigger 12 700 bps Basic Survey Mode, used to initialize instrument Trigger 2C Periodic Instrument Maintenance (PIM): Bias LP to +32V Trigger 2E Put IEB Version Info to housekeeping & clear command counters Trigger 42 61-131 kbps 10-KHz WBR cyclic For more information see TRIG_42.TXT. Trigger 44 Stop WBR cyclic For more information see TRIG_44.TXT. Trigger 46 61-131 kbps compressed 80-KHz WBR cyclic For more information see TRIG_46.TXT. Trigger 48 61-131 kbps non-compressed 80-KHz WBR cyclic For more information see TRIG_48.TXT. Trigger 80 3-Antenna Direction-finding mode For more information see TRIG_80.TXT. Trigger 8A 887 bps Survey Mode for Saturn Tour, toggling between 40-Hz and 2.5-KHz WFR For more information see TRIG_8A.TXT. Trigger 94 Aurora/SKR Mode for Saturn Tour, outside source region For more information see TRIG_94.TXT. Trigger A0 1150 bps SEDDF Mode for Saturn Tour, toggling between 40-Hz and 2.5-KHz WFR For more information see TRIG_A0.TXT. Trigger A8 5.8 kbps RNGSAT Mode for Saturn Tour, with fast WFR For more information see TRIG_A8.TXT. Trigger AC 75 kbps Ring Plane Crossing mode (RPXING) for Saturn Tour For more information see TRIG_AC.TXT. S98 RPWS Commands ----------------- 73DUST_MODE_CNTL,HOLD,LBAND,EZ Use WBR with EZ sensor for Dust Detection 73HFR_ANALYSIS,E1FF Perform HFR Calibration 73HFR_INITIALIZE,80NN Set measurement mode ABC 73HFR_INITIALIZE,8ANN Set frequency step Band HF1 73HFR_INITIALIZE,92NN Set first channel Band HF2 73HFR_INITIALIZE,96NN Set number of frequency steps Band HF2 73HFR_INITIALIZE,98NN Set measurement mode band HF2 73HFR_INITIALIZE,9ANN Set extended measurement mode Band HF2 73LP_VOLT_CNTL,SPHERE,0,128 Bias the LP voltage to -32 volts for the PIM trigger 73MEM_TWEAK,HRP,BYTE,0x0056,0x00NN,WFRC Turn WFR On/Off 73MEM_TWEAK,HRP,WORD,0x0050,0x00NN,WBRC Sets Timing on WBR Captures 73MEM_TWEAK,HRP,WORD,0x0050,0x0100,WFRC Schedule WFR snapshot every 32 seconds 73MEM_TWEAK,HRP,WORD,0x0052,0x00NN,WFRC Sets Timing on WFR onboard processing 73MEM_TWEAK,LRP,WORD,0x0064,0x0000,SOND Disable Sounder 73MEM_TWEAK,LRP,WORD,0x0064,0xC01F,SOND Enable Sounder 73MEM_TWEAK,LRP,WORD,0x0104,0x0080,HFRI Schedule HFR snapshot every 16 seconds 73MFR_CNTL,MODE,COMPRESS,TOGGLE,EX,BZ command mfr to toggle mode with compression 73MFR_CNTL,MODE,COMPRESS,TOGGLE,EZ,BZ command mfr to toggle mode with compression 73WBR_MODE_CNTL,HOLD,LBAND,EX Set WBR Band and Antenna 73WBR_MODE_CNTL,HOLD,LBAND,EZ Controls sensor and filter of Wideband receiver 73WFR_CMPRS_CNTL,OFF,WC_OUT,NNNN Specifies total number of samples 73WRAP,(0x4045] Clear Internal Expanded Block (IEB) memory 73WRAP,(0xB3BA,0x0224) Enable WFR Toggle Mode