PDS_VERSION_ID = PDS3 RECORD_TYPE = STREAM OBJECT = TEXT PUBLICATION_DATE = 2005-06-01 NOTE = " C40_TRIG_9E.TXT describes the RPWS instrument configuration for the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), the Low Frequency Receiver (LFR), the Waveform Receiver (WFR), the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder, and the onboard Dust detection algorithm when using Trigger 9E." END_OBJECT = TEXT END Trigger 9E Description Sequence: All Trigger 9E: SOI Outbound Ring Plane Crossing Mode Low rate data in the basic survey mode is acquired, and 10 kHz WBR is acquired with a fixed size to target a specific bit rate. Receiver Frequency Range Sensor Cycle Time Snapshot Size -------- --------------- ---------------- ---------------- ------------- MFR 25Hz-12KHz EW,BZ 32.000 Seconds HFR 3.6KHz-16MHz EX,EW 16.000 Seconds WFR 1Hz-40Hz EX,EW,BX,BY,BZ 48.000 Seconds 2048 WFR 50Hz-2.5KHz EX,EW,BX,BY,BZ 48.000 Seconds 2048 WBR 100Hz-10KHz EX 0.125 Seconds 1437 Correlations Channels Integ. Size Frequency Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop ---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------ ABC 2E y y 16 n 1000 1 3.6-319KHz HF1 2E y y 2 n 20 1 60 25 0.325-1.825MHz HF2 1E n n 1 n 10 1 72 200 1.825-16.225MHz Bands ABC require 3.160 sec to complete, H1 requires 1.573 sec, and H2 requires 0.886 sec for a total of 5.619 sec per sweep. The hfr cycle time is 16.000 seconds.