PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-05-31                                           
  NOTE                 = "                                                    
      C34_TRIG_38.TXT describes the RPWS instrument configuration for         
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 38."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 38 Description                                                        
Sequence: All                                                                 
                                                                              
Trigger 38 mode                                                               
                                                                              
The instrument is assumed to be operating in trigger 28.                      
                                                                              
Starting in C26, LFDR data was added to this trigger. However, because of the 
V2.4 software bug, no synchronization of the LFDR data with the WBR data is   
done.  Rather, the WBR data is stopped every 32 seconds to allow the low-band 
WFR data to run for ~5 seconds. With the delivery of V2.5 flight software, it 
will be possible to run the WBR during the low-band WFR data acquisition.     
However, the WBR snapshot size will be limited to 2048 samples, and DCC       
compression will have to be turned off. Command Byte Count: 6 Valid Command   
Count: 69                                                                     
                                                                              
Receiver  Frequency Range       Sensor          Cycle Time     Snapshot Size  
--------  ---------------  ----------------  ----------------  -------------  
LFR       1Hz-25Hz         EX,BX               32.000 Seconds                 
MFR       25Hz-12KHz       EW,BZ               32.000 Seconds                 
HFR       3.6KHz-16MHz     EX,EW                7.375 Seconds                 
WBR       1KHz-80KHz       EX                   0.125 Seconds      2048       
                                                                              
          Correlations Channels    Integ.           Size Frequency            
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz  Start - Stop         
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------         
ABC   2E    y     y       16    n   1000  1              3.6-319KHz           
HF1   2E    n     y        2    n     80  1     30    50 0.325-1.825MHz       
HF2   1E    n     n        1    n     20  1     72   200 1.825-16.225MHz      
                                                                              
Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and           
H2 requires 1.461 sec for a total of 7.146 sec per sweep.  The hfr            
cycle time is 7.375 seconds.