PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-05-31                                           
  NOTE                 = "                                                    
      C31_TRIG_34.TXT describes the RPWS instrument configuration for         
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 34."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 34 Description                                                        
Sequence: All                                                                 
                                                                              
Trigger 34 mode                                                               
                                                                              
The instrument is assumed to be operating in trigger 28.                      
                                                                              
Command Byte Count: 6 Valid Command Count: 90 (Trig 34)                       
                                                                              
A MEM_TWEAK is included in this trigger to set the WBR/DUST antenna           
multiplexor to the HF position following WBR or DUST data acquisitions. HRS   
data rate is limited by availability of CPU cycles to perform data movement   
operations (i.e.  no DMA assist available due to concurrent LFDR              
activities).                                                                  
                                                                              
Receiver  Frequency Range       Sensor          Cycle Time     Snapshot Size  
--------  ---------------  ----------------  ----------------  -------------  
LFR       1Hz-25Hz         EX,BX               32.000 Seconds                 
MFR       25Hz-12KHz       EX,BZ               32.000 Seconds                 
Millisec  1.025MHz         EX                   2.500 Seconds      2048       
HFR       3.6KHz-16MHz     EX,EW                7.375 Seconds                 
Millisec  8.025MHz         EX                   2.500 Seconds      2048       
WBR       100Hz-10KHz      EX                   0.125 Seconds      3072       
WBR       1KHz-80KHz       HF                   0.125 Seconds      2048       
                                                                              
          Correlations Channels    Integ.           Size Frequency            
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz  Start - Stop         
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------         
ABC   2E    y     y       16    n   1000  1              3.6-319KHz           
HF1   2E    n     y        2    n     80  1     30    50 0.325-1.825MHz       
HF2   1E    n     n        1    n     20  1     72   200 1.825-16.225MHz      
                                                                              
Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and           
H2 requires 1.461 sec for a total of 7.146 sec per sweep.  The hfr            
cycle time is 7.375 seconds.