PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
DATA_SET_ID            = {"CO-V/E/J/S/SS-RPWS-4-SUMM-KEY60S-V1.0",            
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-ALL-V1.0",              
                          "CO-V/E/J/S/SS-RPWS-3-RDR-LRFULL-V1.0",             
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WBRFULL-V1.0",          
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WFRFULL-V1.0"}          
PRODUCT_ID             = "C28_TRIG_28"                                        
PRODUCT_VERSION_ID     = "1.00"                                               
PRODUCT_TYPE           = ANCILLARY                                            
INSTRUMENT_HOST_NAME   = "CASSINI ORBITER"                                    
INSTRUMENT_HOST_ID     = CO                                                   
INSTRUMENT_NAME        = "RADIO AND PLASMA WAVE SCIENCE"                      
INSTRUMENT_ID          = RPWS                                                 
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-01-27                                           
  NOTE                 = "                                                    
      TRIG_28.TXT describes the RPWS instrument configuration for             
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 28."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 28 Description                                                        
                                                                              
Sequence: C26, C27                                                            
Trigger 28 (Interplanetary Cruise with Direction-Finding & Dust & LP Sweeps)  
                                                                              
     This mode is designed to provide a low bit-rate Survey with low temporal 
and spectral resolution for periods during cruise. No Wideband or Waveform    
measurements are made. The entire RPWS frequency range (1 Hz - 16 MHz) is     
covered.                                                                      
                                                                              
Receiver      Frequency Range         Sensors         Time between Snapshots  
--------      ----------------        -------         ----------------------  
  LFR            1 - 25 Hz            EX, BX              32 seconds          
  MFR           25 - 12 KHz           EX, BZ              32 seconds          
  HFR         3.6 KHz - 16 MHz          E                 64 seconds          
  LP               N/A                  LP              8128 seconds          
                                                                              
The HFR is in direction-finding mode for the frequency range from 3.6 KHz to  
2 MHz.  Thus, measurements are made on all three monopoles EU, EV and EW. For 
higher frequencies only EX and EW are used.                                   
                                                                              
This mode is defined by:                                                      
                                                                              
          Correlations Channels    Integ.           Size Frequency            
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz  Start - Stop         
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------         
ABC  2E   y        y     16     y  1000   1              3.6-319 kHz          
H1   2E   y        y      1     y  160    1   18    100  325k-2.0MHz          
H2   2E   y        y      1     n  80     1   71    200  2.0M-16MHz           
                                                                              
Bands ABC require 6.40 sec to complete, H1 requires 6.07 sec, and H2 requires 
6.36 sec for a total of 18.83 sec per sweep. However, to keep the bit rate    
down the HFR only performs one complete sweep every 64 seconds.               
                                                                              
Starting in C26, dust detection using the EZ sensor was added, and            
also periodic Langmuir Probe sweeps every 8128 seconds.