PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
DATA_SET_ID            = {"CO-V/E/J/S/SS-RPWS-4-SUMM-KEY60S-V1.0",            
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-ALL-V1.0",              
                          "CO-V/E/J/S/SS-RPWS-3-RDR-LRFULL-V1.0",             
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WBRFULL-V1.0",          
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WFRFULL-V1.0"}          
PRODUCT_ID             = "C21_TRIG_64"                                        
PRODUCT_VERSION_ID     = "1.00"                                               
PRODUCT_TYPE           = ANCILLARY                                            
INSTRUMENT_HOST_NAME   = "CASSINI ORBITER"                                    
INSTRUMENT_HOST_ID     = CO                                                   
INSTRUMENT_NAME        = "RADIO AND PLASMA WAVE SCIENCE"                      
INSTRUMENT_ID          = RPWS                                                 
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-03-17                                           
  NOTE                 = "                                                    
      TRIG_64.TXT describes the RPWS instrument configuration for             
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 64."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 64 Description                                                        
Sequence: All                                                                 
                                                                              
Trigger 64 (HF WBR 8MHz with Bit-scoop)                                       
                                                                              
  The instrument is assumed to be operating in trigger 28 or trigger 80.      
                                                                              
These triggers are designed to make use of the data-throttling capability     
in order to take advantage of unused bits (scoop-up) during low-rate          
periods. The hi-rate observation initiated by each of these triggers is       
specified as a "low priority" observation. The wideband data will only be     
acquired if the required number of bits has been scooped up. The target       
data volume must be specified in the trigger command.                         
                                                                              
Receiver  Frequency Range       Sensor          Cycle Time     Snapshot Size  
--------  ---------------  ----------------  ----------------  -------------  
MFR       25Hz-12KHz       EW,BZ               32.000 Seconds                 
Millisec  8.025MHz         EX                   2.500 Seconds      2048       
WBR       1KHz-80KHz       HF (8MHz)            0.500 Seconds      4096