PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
DATA_SET_ID            = {"CO-V/E/J/S/SS-RPWS-4-SUMM-KEY60S-V1.0",            
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-ALL-V1.0",              
                          "CO-V/E/J/S/SS-RPWS-3-RDR-LRFULL-V1.0",             
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WBRFULL-V1.0",          
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WFRFULL-V1.0"}          
PRODUCT_ID             = "C11_TRIG_54"                                        
PRODUCT_VERSION_ID     = "1.00"                                               
PRODUCT_TYPE           = ANCILLARY                                            
INSTRUMENT_HOST_NAME   = "CASSINI ORBITER"                                    
INSTRUMENT_HOST_ID     = CO                                                   
INSTRUMENT_NAME        = "RADIO AND PLASMA WAVE SCIENCE"                      
INSTRUMENT_ID          = RPWS                                                 
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-03-17                                           
  NOTE                 = "                                                    
      TRIG_54.TXT describes the RPWS instrument configuration for             
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 54."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 54 Description                                                        
Sequence: All                                                                 
                                                                              
Trigger 54 (STV WBR Noise Check)                                              
                                                                              
This trigger is based on a mode used in a series of tests that were           
performed before launch, and is designed to test the noise detected by        
the WBR receiver.                                                             
                                                                              
Receiver  Frequency Range       Sensor          Cycle Time     Snapshot Size  
--------  ---------------  ----------------  ----------------  -------------  
MFR       25Hz-12KHz       EX,EW,BX            32.000 Seconds                 
WBR       100Hz-10KHz      EX,EW,BX             1.500 Seconds      2048       
WBR       1KHz-80KHz       EX,EW,BX             1.500 Seconds      2048       
                                                                              
The trigger steps through the WBR frequency filters and antenna connections   
as shown below                                                                
                                                                              
64 Seconds WBR Lband,Bx (MFR Bx)                                              
64 Seconds WBR Hband,Bx (MFR Bx)                                              
64 Seconds WBR Lband,Ex (MFR Ex)                                              
64 Seconds WBR Hband,Ex (MFR Ex)                                              
64 Seconds WBR Lband,EW (MFR EW)                                              
64 Seconds WBR Hband,EW (MFR EW)