PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
DATA_SET_ID            = {"CO-V/E/J/S/SS-RPWS-4-SUMM-KEY60S-V1.0",            
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-ALL-V1.0",              
                          "CO-V/E/J/S/SS-RPWS-3-RDR-LRFULL-V1.0",             
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WBRFULL-V1.0",          
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WFRFULL-V1.0"}          
PRODUCT_ID             = "C11_TRIG_14"                                        
PRODUCT_VERSION_ID     = "1.00"                                               
PRODUCT_TYPE           = ANCILLARY                                            
INSTRUMENT_HOST_NAME   = "CASSINI ORBITER"                                    
INSTRUMENT_HOST_ID     = CO                                                   
INSTRUMENT_NAME        = "RADIO AND PLASMA WAVE SCIENCE"                      
INSTRUMENT_ID          = RPWS                                                 
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-03-17                                           
  NOTE                 = "                                                    
      TRIG_14.TXT describes the RPWS instrument configuration for             
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 14."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 14 Description                                                        
                                                                              
Sequence: All                                                                 
                                                                              
Trigger 14 (LF-WBR Mode)                                                      
                                                                              
     This mode is designed to provide a Survey mode, coupled with Low         
Frequency Wideband (LF-WBR) measurements. The LF-WBR measurements are done    
using the WFR in single channel mode; the data is DCC-compressed (using the   
onboard data compression chip), and because of this, the gain is set to be    
fixed at 30 dB.  Periodic 6-channel Waveform measurements are made also. The  
entire RPWS frequency range (1 Hz - 16 MHz) is NOT covered, because the LFR   
data must be deleted to provide the LF-WBR data. Langmuir Probe data is also  
provided at a high rate; a sweep is done every 10 seconds, and between sweeps 
a 128-point density measurement is done at a 20 Hz sampling rate.             
                                                                              
Receiver Frequency Range  Sensors            Cycle Time    Snapshot Size      
-------- ---------------- ------------------ ------------- -------------      
MFR      25 - 12 KHz      EX, BZ             32 seconds                       
WFR      .05 - 2.5 KHz    EX, EW, BX, BY, BZ 341 seconds   512                
HFR      3.6 KHz - 16 MHz EX, EW             9.875 seconds                    
WFR      .05 - 2.5 KHz    EX                 1.5 seconds   10240              
LP       N/A              Langmuir Probe     10 seconds                       
                                                                              
The HFR is in CMS mode (Composite Mode Survey). No direction-finding is done. 
This mode is defined by:                                                      
                                                                              
          Correlations Channels    Integ.           Size Frequency            
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz  Start - Stop         
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------         
ABC  2E   y        y     16     n  1000   1              3.6-319 kHz          
H1   2E   n        y      2     n  80     1   60    25   325k-1.8MHz          
H2   1E   n        n      1     n  20     1   72    200  1.8M-16MHz           
                                                                              
Bands ABC require 3.16 sec to complete, H1 requires 5.05 sec, and H2 requires 
1.46 sec for a total of 9.67 sec per sweep. Data collection and output limits 
the snapshot time to 9.875 seconds.