PDS_VERSION_ID         = PDS3                                                 
RECORD_TYPE            = STREAM                                               
DATA_SET_ID            = {"CO-V/E/J/S/SS-RPWS-4-SUMM-KEY60S-V1.0",            
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-ALL-V1.0",              
                          "CO-V/E/J/S/SS-RPWS-3-RDR-LRFULL-V1.0",             
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WBRFULL-V1.0",          
                          "CO-V/E/J/S/SS-RPWS-2-REFDR-WFRFULL-V1.0"}          
PRODUCT_ID             = "C11_TRIG_50"                                        
PRODUCT_VERSION_ID     = "1.00"                                               
PRODUCT_TYPE           = ANCILLARY                                            
INSTRUMENT_HOST_NAME   = "CASSINI ORBITER"                                    
INSTRUMENT_HOST_ID     = CO                                                   
INSTRUMENT_NAME        = "RADIO AND PLASMA WAVE SCIENCE"                      
INSTRUMENT_ID          = RPWS                                                 
OBJECT                 = TEXT                                                 
  PUBLICATION_DATE     = 2005-03-17                                           
  NOTE                 = "                                                    
      TRIG_50.TXT describes the RPWS instrument configuration for             
      the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), 
      the Low Frequency Receiver (LFR), the Waveform Receiver (WFR),          
      the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder,      
      and the onboard Dust detection algorithm when using Trigger 50."        
END_OBJECT           = TEXT                                                   
END                                                                           
                                                                              
                                                                              
Trigger 50 Description                                                        
Sequence: All                                                                 
                                                                              
Trigger 50 (STV MFR Noise Check)                                              
                                                                              
This trigger is based on a mode used in a series of tests that were           
performed before launch, and is designed to test the noise detected by        
the MFR receiver.                                                             
                                                                              
Receiver  Frequency Range       Sensor          Cycle Time     Snapshot Size  
--------  ---------------  ----------------  ----------------  -------------  
MFR       25Hz-12KHz       EX,EW,BX,BZ         32.000 Seconds                 
                                                                              
The antenna the MFR is attatched to is switched as shown below                
                                                                              
128 seconds Fixed Ex                                                          
128 seconds Fixed EW                                                          
128 seconds Fixed Bx                                                          
128 seconds Fixed Bz                                                          
256 seconds Toggle Bx/Bz                                                      
256 seconds Toggle Ex/Bx                                                      
256 seconds Toggle Ex/Bz