The instrument is assumed to be operating in trigger 28.
Command Byte Count: 6 Valid Command Count: 116
A MEM_TWEAK is included in this trigger to set the WBR/DUST antenna multiplexor to the Lp position following WBR or DUST data acquisitions.
Trigger 54 adds WBR data, increasing the load on the BIU handler. This addition requires that the WFR data rate be depressed by reducing the sampling interval to 25 seconds. Decreasing the interval below this limit causes loss of WFR traffic on the LRP. This also allows the data to be packed on the DCP, further decreasing the load on LRP.
Receiver Frequency Range Sensor Cycle Time Snapshot Size
-------- --------------- ---------------- ---------------- -------------
LFR 1Hz-25Hz EX,BX 32.000 Seconds
MFR 25Hz-12KHz EX,BZ 32.000 Seconds
HFR 3.6KHz-16MHz EX,EW 7.375 Seconds
WFR 1Hz-40Hz EX,EW,BX,BY,BZ 20.750 Seconds 2048
WFR 50Hz-2.5KHz EX,EW,BX,BY,BZ 20.000 Seconds 2048
Correlations Channels Integ. Size Frequency
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------
ABC 2E y y 16 n 1000 1 3.6-319KHz
HF1 2E n y 2 n 80 1 30 50 0.325-1.825MHz
HF2 1E n n 1 n 20 1 72 200 1.825-16.225MHz
Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and
H2 requires 1.461 sec for a total of 7.146 sec per sweep. The hfr
cycle time is 7.375 seconds.