PDS_VERSION_ID = PDS3 RECORD_TYPE = STREAM OBJECT = TEXT PUBLICATION_DATE = 2005-05-31 NOTE = " C35_TRIG_3C.TXT describes the RPWS instrument configuration for the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), the Low Frequency Receiver (LFR), the Waveform Receiver (WFR), the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder, and the onboard Dust detection algorithm when using Trigger 3C." END_OBJECT = TEXT END Trigger 3C Description Sequence: All Trigger 3C mode Receiver Frequency Range Sensor Cycle Time Snapshot Size -------- --------------- ---------------- ---------------- ------------- LFR 1Hz-25Hz EX,BX 64.000 Seconds MFR 25Hz-12KHz EW,BZ 32.000 Seconds LPswp N/A Langmuir Probe 0.000 Seconds HFR 3.6KHz-16MHz EX,EW 43.875 Seconds HFR 3.6KHz-16MHz EX,EW 0.000 Seconds WFR 50Hz-2.5KHz EX,EW,BX,BY,BZ 96.000 Seconds 2048 Correlations Channels Integ. Size Frequency Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop ---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------ ABC 2E y y 32 n 1000 1 3.6-319KHz HF1 2E y y 8 n 80 1 157 25 0.125-4.050MHz HF2 2E y y 8 n 80 1 243 50 4.025-16.175MHz Bands ABC require 3.120 sec to complete, H1 requires 14.319 sec, and H2 requires 21.750 sec for a total of 39.188 sec per sweep. The hfr cycle time is 43.875 seconds. 1 hfr packets 2002-355T12:59:54.557 2002-355T12:59:54.557 23 A7 D4 45 80 03 A3 0F 05 1F 01 01 01 01 DD 9D 4C 0D 3C 01 24 48 04 36 AA Correlations Channels Integ. Size Frequency Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop ---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------ ABC 2E y y 16 n 1000 1 3.6-319KHz HF1 2E y y 2 n 80 1 60 25 0.325-1.825MHz HF2 1E n n 1 n 20 1 72 200 1.825-16.225MHz Bands ABC require 3.160 sec to complete, H1 requires 5.473 sec, and H2 requires 1.461 sec for a total of 10.094 sec per sweep. The hfr cycle time is 0.000 seconds.