PDS_VERSION_ID = PDS3 RECORD_TYPE = STREAM OBJECT = TEXT PUBLICATION_DATE = 2005-11-29 NOTE = " S16_TRIG_44.TXT describes the RPWS instrument configuration for the High Frequency Receiver (HFR), the Medium Frequency Receiver (MFR), the Low Frequency Receiver (LFR), the Waveform Receiver (WFR), the Wideband Receiver (WBR), the Langmuir Probe (LP), the Sounder, and the onboard Dust detection algorithm when using Trigger 44." END_OBJECT = TEXT END Trigger 44 Description Sequence: C34, C35 Trigger 44 ( WBR cyclic turn-off) This trigger is designed to terminate Wideband Receiver data acquisition, which was nominally started by one of the WBR cyclic triggers (42, 46, or 48). Data acquisition continues for all other receivers, dust detector is resumed, and the sounder is re-enabled. If the sounder was not running prior to the WBR cyclic, then this re-enabling has no effect. In addition, the MFR is switched back to the EX antenna. Receiver Frequency Range Sensors Time between Snapshots -------- --------------- ------- ---------------------- MFR 25 - 12 KHz EX, BZ 32 seconds