The instrument is assumed to be operating in trigger 28.
Command Byte Count: 6 Valid Command Count: 119
A MEM_TWEAK is included in this trigger to set the WBR/DUST antenna multiplexor to the Lp position following WBR or DUST data acquisitions.
Note that the data set acquisition time for this mode is extremely long. This long timing will usually result in an odd HFR record during the transition to another mode in the group (i.e. when not using trigger 10). In particular, it is suggested that any of the HF-WBR modes not follow this trigger directly as the WBR and HFR acquisition timing will be shifted for a period of time as the HFR.
This mode was modified for C21. The H1 band now includes all frequencies from 125 KHz through 4025 KHz; the frequency step size was changed from 50 to 25 KHz. To keep the overall timing about the same, the integration constant was changed from 160 to 80 ms.
Receiver Frequency Range Sensor Cycle Time Snapshot Size
-------- --------------- ---------------- ---------------- -------------
LFR 1Hz-25Hz EX,BX 32.000 Seconds
MFR 25Hz-12KHz EX,BZ 32.000 Seconds
HFR 3.6KHz-16MHz EX,EW 42.125 Seconds
WFR 50Hz-2.5KHz EX,EW,BX,BY,BZ 96.000 Seconds 2048
WBR 100Hz-10KHz EX 0.000 Seconds 2048
Correlations Channels Integ. Size Frequency
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------
ABC 2E y y 32 n 1000 1 3.6-319KHz
HF1 2E y y 8 n 160 1 79 50 0.125-4.075MHz
HF2 2E y y 8 n 80 1 243 50 4.025-16.175MHz
Bands ABC require 3.120 sec to complete, H1 requires 13.883 sec, and
H2 requires 21.750 sec for a total of 38.752 sec per sweep. The hfr
cycle time is 42.125 seconds.