OBJECT     = DATA_SET
DATA_SET_ID                    = "GO-V-EPD-4-SUMM-5.0MIN-V1.0"

OBJECT     = DATA_SET_INFORMATION 
DATA_SET_NAME                  = "GO VEN EPD RESAMPLED SUMMARY 5.0 MIN v1.0"
DATA_SET_COLLECTION_MEMBER_FLG = "N"
START_TIME                     = 1990-041T03:10:10Z
STOP_TIME                      = 1990-041T08:35:10Z
DATA_SET_RELEASE_DATE          = 1993-11-09
PRODUCER_FULL_NAME             = "Christopher R. Brull"
DETAILED_CATALOG_FLAG          = "N"
DATA_SET_DESC                  = "
	This data set contains 5 minute averages for the energetic
particle detector rate data obtained from the LEMMS telescope during
the time the detector was operated during the Venus encounter.  The
data are recorded in five minute averages for each of 17 LEMMS
channels.  (The CMS telescope was not powered up during the Venus
encounter.)  All of the data was taken with the telescope
perpendicular to the spacecraft spin axis (motor step position = 4).
The rates reported are in units of counts/sec.  Each entry in the
browse document is averaged over a five minute time span to reduce the
amount of data more condusive for browsing.  The energetic particle
data included in this browse set are summarized by Williams et al.
[WILLIAMSETAL91]."
CONFIDENCE_LEVEL_NOTE          = "
	Data in this browse set includes only that data which has
valid data flag markers as a result of processing done by the Galileo
Energetic Particles Detector Archive Processor
[EPDPROC91].  A gap in
the data exists from ~06:38 to ~07:38."
END_OBJECT = DATA_SET_INFORMATION

OBJECT     = DATA_SET_TARGET
TARGET_NAME                    = "VENUS"
END_OBJECT = DATA_SET_TARGET                    

OBJECT     = DATA_SET_HOST
INSTRUMENT_HOST_ID             = GO
INSTRUMENT_ID                  = EPD
END_OBJECT = DATA_SET_HOST

OBJECT     = DATA_SET_REFERENCE_INFORMATION
REFERENCE_KEY_ID               = "WILLIAMSETAL91"
END_OBJECT = DATA_SET_REFERENCE_INFORMATION

OBJECT     = DATA_SET_REFERENCE_INFORMATION
REFERENCE_KEY_ID               = "EPDPROC91"
END_OBJECT = DATA_SET_REFERENCE_INFORMATION

END_OBJECT = DATA_SET