The instrument is assumed to be operating in trigger 28.
Command Byte Count: 6 Valid Command Count: 90 (Trig 32)
A MEM_TWEAK is included in this trigger to set the WBR/DUST antenna multiplexor to the HF position following WBR or DUST data acquisitions. HRS data rate is limited by availability of CPU cycles to perform data movement operations (i.e. no DMA assist available due to concurrent LFDR activities).
Receiver Frequency Range Sensor Cycle Time Snapshot Size
-------- --------------- ---------------- ---------------- -------------
LFR 1Hz-25Hz EX,BX 32.000 Seconds
MFR 25Hz-12KHz EX,BZ 32.000 Seconds
HFR 3.6KHz-16MHz EX,EW 7.375 Seconds
HFR 3.6KHz-16MHz EX,EW 7.375 Seconds
Millisec 8.025MHz EX 2.500 Seconds 2048
WFR 50Hz-2.5KHz EX,EW,BX,BY,BZ 20.000 Seconds 2048
WBR 100Hz-10KHz EX 0.125 Seconds 3072
WBR 1KHz-80KHz HF 0.125 Seconds 2048
Correlations Channels Integ. Size Frequency
Band Ant. Auto- Cross- per Band df Period Rep Steps kHz Start - Stop
---- ---- ----- ------ -------- -- ------ --- ----- ---- ------------
ABC 2E y y 16 n 1000 1 3.6-319KHz
HF1 2E n y 2 n 80 1 30 50 0.325-1.825MHz
HF2 1E n n 1 n 20 1 72 200 1.825-16.225MHz
Bands ABC require 3.160 sec to complete, H1 requires 2.525 sec, and
H2 requires 1.461 sec for a total of 7.146 sec per sweep. The hfr
cycle time is 7.375 seconds.