NOTE = "A FIPS flight software upload was implemented on 9/6/2007.
The FIPS_SCANTYPE and STOP_FLUX columns were introduced as a
result. The values for these columns are not meant to be
valid prior to 9/6/2007."
OBJECT = COLUMN
NAME = MET
COLUMN_NUMBER = 1
BYTES = 16
DATA_TYPE = ASCII_REAL
START_BYTE = 1
UNIT = SECOND
DESCRIPTION = "Mission Elapsed Time at the end of the accumulation."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = TIME
COLUMN_NUMBER = 2
BYTES = 21
DATA_TYPE = TIME
START_BYTE = 18
DESCRIPTION = "Spacecraft event time (UTC) for this data record."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = DATA_QUALITY
COLUMN_NUMBER = 3
BYTES = 7
DATA_TYPE = ASCII_INTEGER
MISSING_CONSTANT= -9999
START_BYTE = 40
DESCRIPTION = "Data quality flag.
=0 Good Data, =1 Undefined Bad Data,
=2 Hot Pixel, =4 Scan Hard Limit Exceeded,
=8 SEP, =16 Start Rate Anomaly,
=32 Bad WSZ, 128 Instrument Off,
=32768 Flag Value is Manually Defined."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = FIPS_SCANTYPE
COLUMN_NUMBER = 4
BYTES = 4
DATA_TYPE = ASCII_INTEGER
MISSING_CONSTANT= -9999
START_BYTE = 48
DESCRIPTION = "Indicates the FIPS Scan Mode. Tables referenced here
are one of the eight E/q stepping tables loaded into the instrument.
See the EPPS CDR SIS in the EPPS Document Archive Volume for details.
=0 Normal Scan, =1 High Temp Scan, =2 Burst Scan, =3 Test Scan,
=4 Table 4, =5 Table 5, =6 Table 6, =7 Table 7. "
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = PROTON_V_DIST210
COLUMN_NUMBER = 5
BYTES = 703
DATA_TYPE = ASCII_REAL
START_BYTE = 53
ITEMS = 64
ITEM_OFFSET = 11
ITEM_BYTES = 10
DESCRIPTION = "A 64-element normalized proton velocity probability distribution accumulated
over each of scans 2-10 in the 10 scan sequence"
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = START_FLUX
COLUMN_NUMBER = 6
BYTES = 703
DATA_TYPE = ASCII_REAL
START_BYTE = 757
ITEMS = 64
ITEM_OFFSET = 11
ITEM_BYTES = 10
UNIT = "1/ (cm^2*s*sr*keV)"
DESCRIPTION = "The start flux. Sampled at each of the 64 steps
in the 1st scan of a 10-scan sequence."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = STOP_FLUX
COLUMN_NUMBER = 7
BYTES = 703
DATA_TYPE = ASCII_REAL
START_BYTE = 1461
ITEMS = 64
ITEM_OFFSET = 11
ITEM_BYTES = 10
UNIT = "1/ (cm^2*s*sr*keV)"
DESCRIPTION = "The stop flux. Sampled at each of the 64 steps
in the 1st scan of a 10-scan sequence."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = VALID_EVT_FLUX
COLUMN_NUMBER = 8
BYTES = 703
DATA_TYPE = ASCII_REAL
START_BYTE = 2165
ITEMS = 64
ITEM_OFFSET = 11
ITEM_BYTES = 10
UNIT = "1/ (cm^2*s*sr*keV)"
DESCRIPTION = "The valid event flux. Sampled at each of the
64 steps in the 1st scan of a 10-scan sequence."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = PROTON_FLUX
COLUMN_NUMBER = 9
BYTES = 703
DATA_TYPE = ASCII_REAL
START_BYTE = 2869
ITEMS = 64
ITEM_OFFSET = 11
ITEM_BYTES = 10
UNIT = "1/ (cm^2*s*sr*keV)"
DESCRIPTION = "The proton flux. Sampled at each of the 64
steps in scan 10 of a 10-scan sequence."
END_OBJECT = COLUMN
OBJECT = COLUMN
NAME = EVT_PROC_FLUX
COLUMN_NUMBER = 10
BYTES = 703
DATA_TYPE = ASCII_REAL
START_BYTE = 3573
ITEMS = 64
ITEM_OFFSET = 11
ITEM_BYTES = 10
UNIT = "1/ (cm^2*s*sr*keV)"
DESCRIPTION = "The events processed flux. Sampled at each of
the 64 steps in scan 10 of a 10-scan sequence."
END_OBJECT = COLUMN
|